Therabody

 TheraFace Mask Glo with Vibration Therapy

Benefits

• Visibly improve skin tone, texture, and firmness with science-backed treatments you can trust
• Reduce the appearance of fine lines and wrinkles naturally — without invasive, in-office treatments
• Maintain a youthful-looking, glowing complexion — no appointment necessary
• Achieve full-face, professional-grade results without leaving home
• Use individual light treatments to target breakouts, discoloration, or dullness
• Relax and unwind with gentle vibration massage that soothes the scalp and temples

Features

• The preset 12-minute treatment cycles through 4 minutes of each light therapy to boost collagen production while diminishing wrinkles, discoloration and acne. Or choose from individual 4-minute Red, Red + Infrared, or Blue light treatments for personalized results.
• Red Light therapy helps reduce fine lines, wrinkles and dark spots
• Red + Infrared Light stimulates collagen production and firms skin
• Blue Light fights acne and acne-causing bacteria.
• 504 medical-grade LEDs provide an even, full-face treatment.
• VibraWave technology provides a gentle scalp massage with 3 settings for a spa-like experience
• Cordless, lightweight design with a breathable fit that hovers just above your skin for comfortable multi-tasking without cords or clunky remotes.
• Made with medical-grade silicone and a smooth matte finish for easy cleaning at home or on the go.
• TheraFace Mask Glo is an FDA-cleared medical device.

Includes

• TheraFace Mask Glo Device
• Protective Eye Shield
• USB-C Charging Cable

Item 2647330

1. Charge the device. Charge the device before use.

2. Prepare for treatment. Begin with a clean, dry face. Do not allow the device to come in contact with colored solids or liquids, as it is hard to clean after being dyed. Remove all makeup, wash hands thoroughly, and ensure that cosmetics (such as lipstick) and oils do not come into contact with the device.

3. Put on the device. Place the device on your face, and adjust both of the Velcro straps to your desired fit. The device should feel snug but not too tight on your face.

4. Turn on the device. Press and hold the LED power button to begin a light and vibration treatment. Press and hold the vibration power button to turn on the vibration treatment only. At any point during the light and vibration treatment, press and hold the vibration button to turn off the vibration for light treatment only.

5. Select your desired LED light treatment setting. The device will guide you through a 12-minute science-backed treatment that automatically cycles through three LED light treatment types: red light, red + infrared light, and blue light. Each treatment will be 4 minutes long. Press the LED power button at any point to cycle through light therapy types. You will hear a beep when the light therapy type changes.

6. Select your desired vibration treatment setting. There are two vibrating motors located in the headstrap. Press the vibration button to toggle through the three vibration modes (Relax: low-frequency continuous; Refresh: higher-frequency continuous; and Relieve: wave). Use vibration as a standalone treatment without LED light by pressing and holding the LED button while vibration is on. If vibration is used as a standalone treatment, it will run for 12 minutes.

7. Sit back and enjoy. Relax and enjoy your treatment. 8. Turn off the device. Press and hold the power button at any point during the treatment to turn off the device. The LED light will turn off when the device is off. The device will automatically shut off after the 12-minute treatment is complete. *This device has built-in eyeshields. Normal use of the eyeshields may result in redness around your eye area. Some redness is normal and should subside within 5-10 minutes of using the device

Before using or charging, read all instructions and cautionary markings in this manual, on the charger.

Shipping Restrictions : This item cannot be shipped via air.