Beauty Begins in the Shower. Chlorine is one of the real culprits behind dry, damaged hair and skin. A survey of public water* shows that regular household water can contain nearly as much chlorine as that recommended for swimming pools. By using a patented formula of Tourmaline, precious metals and minerals, T3 Source Shower Filters can remove up to 95% of chlorine from shower water which:
Improves hair health and beauty
Enhances the color retention and vibrancy of processed hair
Helps skin to be less dry, retain more moisture and look healthier
Makes skin noticeably softer and smoother
Discover the Pure Water Difference: Through a filtration process called "Redox", T3 Source Shower Filters transform chlorine into harmless elements that are too large to be absorbed by hair and skin. The patented technology is tested and certified by the National Sanitation Foundation (NSF) who is a US water supply auditor and world health organization member.
Clinically Proven Hair and Skin Benefits - Average Hair Health** and Beauty Benefits (when compared to using tap*** water):
49% Reduction in Frizz
22% Increase in Body
36% Increase in Comb-ability
31% Increase in Shine
By removing chlorine from shower water, your skin will be less dry, retain more moisture and look healthier.
Features & Benefits:
Calcium, Zinc, Copper: Work together to convert and remove chlorine
Tourmaline: Produces negative ions that reduce water cluster size, which improves filtration and helps PH balance the water
You will need 1 inch open end wrench or adjustable crescent wrench. Unscrew existing showerhead from pipe. Clean the threads. Wrap plumber's tape (included in box) clockwise around pipe threads. Screw the T3 Source Showerhead into place and flush with hot water for 1 minute before showering.
If your showerhead is difficult to remove, try the following: Soak joint area with vinegar to break down calcium deposits and/or wrap a wet, hot towel around area to loosen joints. Grasp the pipe with a crescent wrench and unscrew the showerhead with a pipe wrench. Use caution so as not to cause damage.
Filter Installation Procedure: Unscrew the top and bottom halves of the T3 Source. Remove used filter and recycle by puncturing screen and emptying contents into garden or flushing down drain. Recycle plastic container. Remove O-ring from inside of T3 Source and clean as necessary. Lightly lubricate O-ring groove inside showerhead with Vaseline before re-installing ring. Remove sticker from each end of new filter. Drop in new filter and screw housing halves together. Flush with hot water for 1 minute before showering.